emberkom/usmt
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove scanstate.log and update offline params

Browse Source
This commit is contained in:
dyoder
2019-11-26 11:24:52 -05:00
parent c1e0e48ee4
commit 260281661c
2 changed files with 3 additions and 207 deletions
Download Patch File Download Diff File Expand all files Collapse all files
tools/amd64/scanstate.log
-204
View File
@@ -1,204 +0,0 @@
2019-08-13 22:55:07, Info [0x000000] SCANSTATE.EXE
2019-08-13 22:55:07, Info [0x000000] USMT Started at 2019/08/13:22:55:07.541
2019-08-13 22:55:07, Info [0x000000] Command line: E:\usmt\tools\amd64\scanstate.exe /?
2019-08-13 22:55:07, Info [0x000000]
ScanState.exe collects files and settings into a migration store to be restored
using LoadState.exe. You must specify the same .xml files on both the
ScanState and LoadState command-lines.
Syntax: scanstate <StorePath> [Options]
StorePath Path where Scanstate saves the files and settings.
StorePath is the path to the upper level directory,
not the migration file.
For example, if you specify scanstate C:\store,
the resulting StorePath is C:\store\usmt\usmt.mig.
Do not specify the full path on the Scanstate.exe
command-line, or the migration will fail.
/auto[:ScriptDir] Calls migapp.xml, migdocs.xml, and sets logging to v:13
Use ScriptDir to specify the location of migapp.xml and
migdocs.xml if they are not in the same directory as
the ScanState executable.
/targetWindows7 Optimizes ScanState when the destination computer is
running Windows 7. You should use this option with
/genconfig and when you create a store.
/targetWindows8 Optimizes ScanState when the destination computer is
running Windows 8. You should use this option with
/genconfig and when you create a store.
/genconfig:filename Generates a Config.xml file. You cannot specify the
<StorePath> parameter.
Options you can specify are /o, /i, /v, and /l.
/genmigxml:filename Generates a Mig.xml file containing patterns for
data selection. You cannot specify the <StorePath>
parameter.
The only options that you can specify are /v and /l.
/o Overwrites any existing migration store.
/p:filename Generates a space-estimate file.
This option does not collect the user state.
/localonly Specifies that only files that are stored on the local
computer will be saved.
/efs:abort|skip|decryptcopy|copyraw|hardlink
Controls the behavior of ScanState when Encrypting
File System (EFS) files are encountered.
Abort: Fails if EFS files are found.
Skip: Ignores all EFS files and continues.
Decryptcopy:
Decrypts and copies files if possible.
Fails if the files cannot be decrypted.
Copyraw: Copies encrypted EFS files.
Hardlink:
Makes a hardlink to the EFS file.
Use only with the /hardlink option.
/encrypt:AES|AES_128|AES_192|AES_256|3DES|3DES_112
Encrypts the migration store using the specified
cryptographic algorithm. Default value is 3DES.
You must also specify the /key or /keyfile option.
/hardlink Enables hardlinks for a non-compressed store. Use only
for computer refresh scenarios. Requires /nocompress.
/key:KeyString Specifies the encryption key.
/keyfile:FileName Specifies the location and name of a .txt file
containing the encryption key.
/nocompress Specifies that the migration store is not compressed.
/ppkg Specifies that the migration store is a provisioning
package. This option cannot be used with /nocompress,
/hardlink or /p.
/drivers[:<options>] Specifies that USMT should migrate 3rd party drivers.
By default all drivers are migrated. <options> can be
used to select drivers to migrate. They are of the form
+n:<pattern>, -n:<pattern>, +p:<pattern>, -p:<pattern>,
+c:<pattern>, -c:<pattern>, where +-n can filter the
migrated driver by the name of the INF file, +-p can
filter them by publisher and +-c by class name or class
GUID. Multiple /drivers are allowed, The last pattern
matching a particular driver wins.
/drivers must be used with /ppkg.
/apps[:<options>] Specifies that USMT should capture the customization of
the current operating system. This consists of Win32
applications, system-wide settings, and any other files
that are not part of the operating system. No modern
apps and no user state will be captured.
A provisioning package captured this way can only be
consumed during the process of deploying a new OS, it
cannot be used with Loadstate
<options> can be a ';' separated list of the following:
+/-sysdrive - causes the /apps switch to examine the
entire system drive for applications and other files,
or be confined to the windows folders only
+sysdrive is the default.
+/-oeminfo - causes the /apps switch to capture or not
the OEM specific help and support information.
+oeminfo is the default.
+/-appfiles - causes the /apps switch to capture or not
the actual payload of applications. -appfiles is useful
when one wants to capture only the system settings on a
computer where applications were already captured.
+appfiles is the default.
/apps must be used with /ppkg unless /genconfig is used.
/apps cannot be used with any /target switches.
/diff:FileName Specifies the full path to a provisioning package that
was previously captured using /apps on this system. The
current run will use that previously captured package
to determine objects that have already been captured in
a previous run and should not be captured again.
When using the /diff switch please make sure that the
provisioning package specified by /diff is also applied
together with the one currently being captured.
/diff can only be used with /apps.
/l:FileName Specifies the location and name of the log file.
/v:Level Enables verbose output in the log file. Specify one
of the following levels: 0, 1, 4, 5, 8, 9, 12, or 13.
The default verbosity level is 0.
/progress:FileName Specifies the location and name of the optional
progress log file.
/c Specifies that the ScanState command continues to run
even if there are non-fatal errors.
/r:TimesToRetry Specifies the number of times to retry when an error
occurs. The default value is 3 attempts.
/w:SecondsToWait Specifies the time to wait, in seconds, before retrying
a failed attempt. Default value is 1 second.
/ui:[Domain\]UserName Migrates the specified users. To migrate a local user,
specify the UserName parameter only. The Domain and
UserName parameters can contain wildcard characters
(* or ?).
/ue:[Domain\]UserName Excludes the specified users. To exclude a local user,
specify the UserName parameter only. The Domain and
UserName parameters can contain wildcard characters
(* or ?).
/uel:NumberOfDays|YYYY/MM/DD
Specifies that the migration should exclude users that
have not logged on within the specified time period.
The NumberOfDays parameter can be 0 to exclude all
users who are not currently logged on.
/i:FileName Specifies the location and name of an .xml file that
contains rules that define the settings and files
to migrate.
/help or /? Displays help at the command line.
/config:FileName Specifies the Config.xml file that USMT should use.
/offlineWinDir:WinDir Specifies the path to the offline windows directory
that USMT should use to gather user state.
/offlineWinOld:WinDir Specifies the path to the offline windows old directory
that USMT should use to gather user state.
/offline:FileName Specifies the Offline.xml file that USMT should use
to gather user state.
Note: This is an alternative to /offlineWinDir or
/offlineWinOld
/vsc:OFF Turns off volume shadow copy when a file is in use.
For compatibility reasons /vsc is still supported, but
volume shadow copy is now turned on by default.
Specify /vsc:OFF to turn it off explicitly
/tel:ON|OFF Turns on or off telemetry. If on, the tool will send
data about USMT usage to Microsoft.
Telemetry is currently ON by default.
/listfiles:FileName Specifies the location and name of a file which will
contain a list of all files gathered.
Notes:
* For more information about these options, see the USMT User's Guide
(https://go.microsoft.com/fwlink/?LinkId=213336).
* You can specify the /i, /ui, /ue and /uel options more than once
if necessary.
* You cannot specify the /key and /keyfile options together.
* You cannot specify the /encrypt and /nocompress options together.
* You cannot specify the /encrypt and /ppkg options together.
[gle=0x00000002]
2019-08-13 22:55:07, Info [0x000000] USMT Completed at 2019/08/13:22:55:07.570[gle=0x00000002]
2019-08-13 22:55:07, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x00000002]
tools/backup.bat
+3 -3
View File
@@ -18,7 +18,7 @@ goto prompt-offline
:set-offline
echo.
set /p OFFLINE_WIN_DIR=Enter the path to the Windows directory:
set OFFLINE="/offlineWinDir:%OFFLINE_WIN_DIR%"
set OFFLINE=/offlineWinDir:%OFFLINE_WIN_DIR%
goto prompt-backup-type
:set-online
@@ -41,7 +41,7 @@ set USMT_STORE=%~dp0..\usmt_store\%COMPUTERNAME%
rem --- Set the command line args for performing the migration
set SCANSTATE_USERS=/ue:*\Administrator /ue:*\ekadmin
set SCANSTATE_XML=/i:"%USMT_STORE%\config\MigUser.xml" /i:"%USMT_STORE%\config\MigDocSystem.xml" /i:"%USMT_STORE%\config\MigCustom.xml"
set SCANSTATE_XML=/i:"%USMT_STORE%\config\MigUser.xml" /i:"%USMT_STORE%\config\MigDocSystem.xml" /i:"%USMT_STORE%\config\MigCustom.xml" %OFFLINE%
goto start
rem --- Get domain to backup
@@ -66,7 +66,7 @@ set USMT_STORE=%~dp0..\usmt_store\%COMPUTERNAME%_%BACKUP_USER%
rem --- Set the command line args for performing the migration
set SCANSTATE_USERS=/ue:* /ui:%BACKUP_DOMAIN%\%BACKUP_USER%
set SCANSTATE_XML=/i:"%USMT_STORE%\config\MigUser.xml" /i:"%USMT_STORE%\config\MigCustom.xml"
set SCANSTATE_XML=/i:"%USMT_STORE%\config\MigUser.xml" /i:"%USMT_STORE%\config\MigCustom.xml" %OFFLINE%
:start
cls